Local fan speed control

Fan speed can be set manually via a knob or potentiometer on the front panel of the fan speed controller. These fan speed controllers have a built-in switch or potentiometer to adjust the fan speed.

All solutions

Local fan speed control

Remote fan speed control

Demand based fan speed control

Show filters

Solution code

Title and description

DRZ------001

AC motor 2,5 A | variable speed control | DIN rail | softstart

Variable speed control for AC fans with single-phase motor. The maximum motor current is 2,5 A. The enclosure requires DIN rail mounting. Fan speed can be adjusted via the potentiometer from low to high speed. In OFF position, the motor is disabled. The supply voltage is 230 VAC. The fan speed is regulated by varying the motor voltage via phase angle control - Triac technology.

Articles

DRY-1-25-AT

Fan speed controller, 230 VAC / 50-60 Hz, 2,5 A, DIN Rail mounting, IP30.

Current stock 25 U.

Factory lead time 4 Week(s)

DRY------001

AC motor 1,5 A | variable speed control | DIN rail | softstart

Variable speed control for AC fans with single-phase motor. The maximum motor current is 1,5 A. The enclosure requires DIN rail mounting. Fan speed can be adjusted via the potentiometer from low to high speed. In OFF position, the motor is disabled. The supply voltage is 230 VAC. The fan speed is regulated by varying the motor voltage via phase angle control - Triac technology.

Articles

DRY-1-15-AT

Fan speed controller, 230 VAC / 50-60 Hz, 1,5 A, DIN Rail mounting, IP30.

Current stock 21 U.

Factory lead time 4 Week(s)

DRW------001

AC motor 1,5 A | variable speed control | DIN rail | kickstart

Variable speed control for AC fans with single-phase motor. The maximum motor current is 1,5 A. The enclosure requires DIN rail mounting. Fan speed can be adjusted via the potentiometer from high to low speed. In OFF position, the motor is disabled. The supply voltage is 230 VAC. The fan speed is regulated by varying the motor voltage via phase angle control - Triac technology.

Articles

DRX-1-15-AT

Fan speed controller, 230 VAC / 50-60 Hz, 1,5 A, DIN Rail mounting, IP30.

Current stock 13 U.

Factory lead time 4 Week(s)

DRX------001

AC motor 2,5 A | variable speed control | DIN rail | kickstart

Variable speed control for AC fans with single-phase motor. The maximum motor current is 2,5 A. The enclosure requires DIN rail mounting. Fan speed can be adjusted via the potentiometer from high to low speed. In OFF position, the motor is disabled. The supply voltage is 230 VAC. The fan speed is regulated by varying the motor voltage via phase angle control - Triac technology.

Articles

DRX-1-25-AT

Fan speed controller, 230 VAC / 50-60 Hz, 2,5 A, DIN Rail mounting, IP30.

Current stock 19 U.

Factory lead time 4 Week(s)

IT1------001

AC motor 1,5 A | variable speed control

Variable speed control for AC fans with single-phase voltage controllable motor. The maximum motor current is 1,5 A. The AC fan speed can be adjusted via the potentiometer. The fan can be deactivated via the illuminated ON-OFF switch. The supply voltage is 110-230 VAC. The fan speed is regulated by varying the motor voltage via phase angle control - Triac technology.

Articles

ITR-9-15-DT

Fan speed controller (electronic, triac), zero-cross detection, supply voltage: 110-230 VAC ±10 %/ 50-60 Hz, Imax: 1,5 A, kickstart-softstart selection.

Current stock 83 U.

Factory lead time 4 Week(s)

IT2------001

AC motor 3 A | variable speed control

Variable speed control for AC fans with single-phase voltage controllable motor. The maximum motor current is 3 A. The AC fan speed can be adjusted via the potentiometer. The fan can be deactivated via the illuminated ON-OFF switch. The supply voltage is 110-230 VAC. The fan speed is regulated by varying the motor voltage via phase angle control - Triac technology.

Articles

ITR-9-30-DT

Fan speed controller (electronic, triac), zero-cross detection, supply voltage: 110-230 VAC ±10 % / 50-60 Hz, Imax: 3 A, kickstart-softstart selection.

Current stock 55 U.

Factory lead time 4 Week(s)

IT0------001

AC motor 10 A | variable speed control

Variable speed control for AC fans with single-phase voltage controllable motor. The maximum motor current is 10 A. The AC fan speed can be adjusted via the potentiometer. The fan can be deactivated via the illuminated ON-OFF switch. The supply voltage is 110-230 VAC. The fan speed is regulated by varying the motor voltage via phase angle control - Triac technology.

Articles

ITR-9100-DT

Fan speed controller (electronic, triac), zero-cross detection, supply voltage: 110-230 VAC ±10 % / 50-60 Hz, Imax: 10 A, kickstart-softstart selection.

Current stock 14 U.

Factory lead time 4 Week(s)

DRU------001

AC motor 2,5 A | variable speed control | DIN rail

Variable speed control for AC fans with single-phase motor. The maximum motor current is 2,5 A. The enclosure requires DIN rail mounting. The fan speed can be adjusted via the 3-button interface. The motor can be enabled or disabled via the middle button with green checkmark. The supply voltage is 230 VAC. The fan speed is regulated by varying the motor voltage via phase angle control - Triac technology.

Articles

DRE-1-25-DT

Digital fan speed controller (electronic, triac), supply voltage: 220-240 VAC / 50-60 Hz, Imax 2,5 A, selectable regulation type, 7- segment LED display, Modbus RTU communication, DIN rail mounting.

Current stock 7 U.

Factory lead time 4 Week(s)

SCI------001

AC motor 7,5 A | dual speed selection | TK monitoring

Day-night ventilation controller for single-phase motors. The maximum motor current is 7,5 A. Typically, it regulates fan speed in HVAC applications. Two optimal fan speeds can be selected via the 5-step rotary switches. Via a clock, thermostat or external switch, one of both can be selected. The other input can be used for remote start-stop commands. After a power failure, the motor will automatically restart. The TK monitoring function deactivates the motor in case of overheating.

Articles

SC2A1-75L25

Transformer fan speed controller, 230 VAC, 7,5 A, 2*5 p. High/Low 0-80-100-120-150-170-190-230 VAC, TK motorprotection, Run/Stop contacts, change-over contact. Auto restart after power failure.

Current stock 0 U.

Factory lead time 4 Week(s)

Next arrival 06/06/2025 - 10 U.

SCK------001

400 V motor 1,5 A | day-night fan speed control | TK monitoring

Dual speed controller for fan with three-phase 400 VAC motors. The maximum motor current is 1,5 A. Typically, it regulates fan speed in HVAC applications. Two optimal fan speeds can be selected via the 5-step rotary switches. Via a clock, thermostat or external switch, one of both can be activated. This makes it possible to create a day-night ventilation regime. The other input can be used for remote start-stop commands. After a power failure, the motor will automatically restart. The TK monitoring function deactivates the motor in case of overheating. The supply voltage is 3x 400 VAC.

Articles

SC2A4-15L55

Transformer fan speed controller, 400 VAC, 1,5 A, 2*5 p. High/Low 0-13 x 400 VAC, TK motorprotection, Run/Stop contacts, change-over contact, auto restart after power failure.

Current stock 9 U.

Factory lead time 4 Week(s)