Sprite icons

Temperature | humidity controller wall mounting | 24 V AC - 24 V DC

Article code RCTHG-2
GTIN 0.540.100.301.793.7
Intrastat number 90.32.89.00
Category Room temperature and humidity controllers
Current stock 3 U.
Factory lead time 5 Week(s)

Product description

Temperature, relative humidity, and ambient light levels are measured by this room sensor. The distinctive enclosure supports surface mounting. The supply voltage is 24 V AC or 24 V DC. The sensor algorithm controls the single analogue output, based on the measured values. The output can directly control an EC fan, an AC fan speed controller, or a damper actuator. The output type itself is selectable.

Through Modbus RTU, all measurements and the output value are accessible and all settings can be adjusted. The LEDs used for status indication also have an adjustable light level.

The ambient light sensor can be used in many applications to regulate the ventilation system depending on how many people are in the room. This HVAC sensor is frequently used to regulate humidity and temperature in data centers, museums, libraries, wine cellars, etc.

Additional specifications and description

Are the temperature and humidity level appropriate?
This HVAC controller measures temperature, relative humidity, and ambient light level. The temperature is clearly indicated by the green, yellow, and red LEDs. The green LED indicates that the temperature is within the temperature range that has been set. When the temperature falls into the alert range, the yellow LED illuminates. The colour red represents extreme heat or cold. The LEDs can also show the relative humidity. The Modbus RTU protocol allows access to the measured temperature, relative humidity, and ambient light level.

The sensor's output can directly control an EC fan, an AC fan speed controller, or a damper actuator. The output value varies in direct proportion to the measured temperature and relative humidity. For example, if relative humidity rises, the sensor will increase fan speed or open the damper.
 
Easy to connect
The cage clamp terminal blocks simplify wiring and installation. They eliminate the need for routine maintenance and ensure a solid or stranded wire contact. This sensor can be powered by either 24 V DC or 24 V AC. It is designed for a three-wire connection. The output ground (GND) is internally connected to the supply voltage ground (V-). Make sure not to connect this common ground to any other DC-powered devices. Wall mounted temperature sensor controller
 
Easy to use
There is only little configuration necessary for this sensor. It can be almost directly used once it has been installed. Temperature and relative humidity are often region- and seasonal-specific. These parameters are still set to the correct values during installation. The other default settings are suitable for most applications. However, if necessary, they can also be adjusted via the respective Modbus registers. For example, a different output type can be selected to make it compatible with other devices: 0-10 VDC; 0-20 mA; 0-100% PWM; Modbus RTU. The light levels of the LEDs used for status indication are also adjustable. The Modbus register directory provides a complete list of all programmable settings.
 
High quality
This HVAC sensor controller was made in Europe. In our factory, each sensor is calibrated and tested. We use high-quality sensor elements and components. This ensures the HVAC transmitter's long-term stability and accuracy. The sensor enclosure is dust and moisture resistant to IP30 standards. It can be wall-mounted indoors.
 
∞ Monitoring indoor air quality
 

Remarks, reviews & ratings

15/12/2023
Išvaizda gal ir nėra ideali, bet veikia gerai, patiko nuspaudžiami gnybtai, greitas, paprastas pajungimas
Add a remark or a review and rating.
0
Report an error