Logo Sentera
Sentera – your partner in HVAC control solutions
Allow us to inform you
Leave us your contact data so that we can communicate with you.


How to use a ventilation system during COVID-19?

General questions about Sentera devices
The risk of transmission of the SARS-CoV-2 virus via aerosols appears to be rather low outdoor or in enclosed spaces with a large volume. In addition to the usual standard hygiene measures, REHVA – the Federation of European HVAC associations - advises to increase ventilation in order to reduce the risk of contamination or transmission via the air. They advise to deactivate indoor air recirculation, to increase the supply rate of fresh air and the extraction rate of stale air. The ventilation system should be activated on continuous base. For non-occupied spaces, the air volume flow can be reduced to save energy.

In case no ventilation system is available, they advise active operation of window airing in combination with the monitoring of indoor air quality. Sentera advises to use CO2 transmitters or air quality sensors to monitor your indoor air quality. These HVAC sensors are designed to monitor indoor air quality. Long before occupants will perceive bad air quality or lack of ventilation, Sentera HVAC sensors will alert you to open the window.

Recent news
Date 25/05/2021
CO2 monitoring in schools
CO2 monitoring in schools Sentera CO2 meters help to reduce the spread of the COVID-19 virus in this school in Sint-Niklaas, Belgium. >>>
Date 16/03/2021
CO2 monitoring system to reduce the risk of COVID-19 contamination
CO2 monitoring system to reduce the risk of COVID-19 contamination Fresh indoor air reduces the risk of COVID-19 contaminations. Sentera HVAC sensors check whether there is sufficient fresh air supply. The measurements can be visualised via a 5-inch touchscreen. >>>
Date 01/02/2021
CO2 sensors with visual and audible alert
CO2 sensors with visual and audible alert Too high CO2 concentrations? Sentera CO2 sensors are now available with audible alert. On top of that, the green, yellow and red LED offer a clear, visual indication of the CO2 level. The supply voltage is 230 V or 24 V. >>>