Sprite icons

Temperature | humidity controller flush mounting | 230 V AC

Article code FCTH8
GTIN 14 5401003006238
Intrastat number 90.32.89.00
Category Room temperature and humidity controllers
Current stock 4 U.
Factory lead time 4 Week(s)

Product description

This smart room sensor provides comprehensive HVAC control through temperature, relative humidity, and ambient light measurements.

Measurement and Control
It measures temperature and relative humidity (ranges are selectable). It controls devices like fans or dampers with a single analog output based on the measured values. The output type is selectable and provides fan speed control.

It includes an ambient light sensor that controls ventilation based on room occupancy.

Power and Mounting
It features an 85-264 VAC / 50-60 Hz universal input voltage. It's suitable for flush or surface mounting.

Communication and Customization
All data is accessible via Modbus RTU, and settings can be changed. Firmware can be updated with a bootloader.

It has 3 LED status indicators with adjustable light intensity.

Performance and Application
It offers long-term stability and accuracy. It's used in sensitive environments such as data centers, museums, and libraries.

Additional specifications and description

 
 
What Values Does the Sensor Measure, and How Do the LED Indicators Work?
The temperature, relative humidity, and ambient light level are all measured by this HVAC transmitter. The green, yellow, and red LED provide a distinct visual indication of the temperature. The green LED shows that the temperature is within the acceptable limits. The yellow LED turns on when the temperature reaches the alert range. Red indicates extreme temperatures. The LEDs can also be used to visualise relative humidity. Through Modbus RTU communication, the measured temperature, relative humidity, and ambient light level are available.
 
What Can Be Done to Prevent Condensation?
The output of this sensor can operate a damper actuator, an AC fan speed controller, or an EC fan directly. Temperature and relative humidity are maintained within their ranges through proportional regulation of the sensor output value. For instance, the controller might speed up the fan or open the damper if the relative humidity rises. The Modbus holding registers can be used to change the ranges and other settings.
 
Which Devices Does the Sensor Control, and How Does It Operate?
This temperature and humidity transmitter runs without an external power source. Only 230 V AC supply voltage is needed. The terminal blocks with cage clamps hasten installation and minimize wiring. They eliminate the need for routine maintenance and ensure a reliable connection for solid or stranded wires. 
 

Flush mounted sensor in wall

What Is the Sensor Enclosure's Protection Rating, and How Is It Mounted?
The sensor enclosure provides IP30 protection from the entry of moisture and dust. It can be integrated into a typical European wall mounting box or mounted on the wall. When the sensor is flush mounted, only the front plate will be visible on the wall.

What Are the Sensor's Installation and Customization Options?
There is very little configuration necessary for this sensor. It can almost directly be used once it has been installed. Temperature and relative humidity are frequently region- and season-dependent. During installation, these parameters are still set to the correct values. The other default settings will most likely be adequate for most applications. They can, however, be adjusted via the respective Modbus registers if necessary. To make it compatible with other devices, you can choose a different output type, for example: Modbus RTU; 0-10 VDC; 0-20 mA; 0-100% PWM. The brightness of the LEDs used for status indication can also be adjusted. The Modbus register map contains a comprehensive list of all programmable settings.
 
What Is the Sensor's Manufacturing Quality, Calibration, and Reliability?
Europe is where this HVAC transmitter is made. In our factory, each sensor is calibrated and tested. High-quality sensor components and elements are used. This guarantees the HVAC transmitter's long-term accuracy and stability. 



  
 

Remarks, reviews & ratings

09/01/2024
Nereikia jokio maitinimo šaltinio jungi 230V ir viskas, tas patiko.
23/10/2023
Geras dizainas, matavimų indikacija ir dar patiko, kad yra maitinimo įtampos pasirinkimas.
10/10/2023
Man labai patiko FCTH serijos dizainas, nes galima įmontuoti į sieną ir puikiai tinka prie namų interjero, neatrodo kaip šašas kurį lengva užkliūti ir nulaužti. Pagal matavimus viskas lyg ir pakankamai tiksliai išmatuojama.
Add a remark or a review and rating.
0
Report an error
Would you like to see all information available on our website? Please log in or register....
Log in
Obligatory(*)