Sentera uses cookies !
Privacy policy
Logo Sentera
Sentera – your partner in HVAC control solutions
White plastic enclosure with cutouts for air flow, 3 LEDs and white lens
White plastic enclosure with cutouts for air flow, 3 LEDs and white lens
White plastic enclosure with cutouts for air flow, 3 LEDs and white lens
White plastic enclosure with cutouts for air flow, 3 LEDs and white lens
White plastic enclosure with cutouts for air flow, 3 LEDs and white lens
White plastic enclosure with cutouts for air flow, 3 LEDs and white lens
PCB with electronic components in plastic enclosure

Intelligent temperature | humidity | CO | NO2 sensor, 24 VAC-VDC


Product description

Multifunctional room transmitter to measure temperature, relative humidity, CO, NO2 and ambient light. The unique enclosure allows flush mounting or surface mounting. The supply voltage is 24 VAC or 24 VDC. The sensor algorithm controls the single analogue output based on the measured values. This single output can be used to directly control an EC fan, an AC fan speed controller or a damper actuator. The output type can be selected. By default, it is 0-10 Volt. All measurements and the output value are available via Modbus RTU. The CO - NO2 sensor element is replaceable. All settings can be adjusted via Modbus RTU. Also the light intensity of the LEDs for status indication is adjustable.




Article code FCCOG-R
GTIN 0.540.100.300.619.1
Category Room CO - NO2 sensors
Available
Current stock 5 U.
Factory lead time 4 Week(s)
Documents

Additional specifications and description

 
Is there sufficient fresh air supply?
This HVAC transmitter offers a clear, visual indication of the CO level via the green, yellow and red LED. The green LED indicates that the CO level is within range - there is sufficient fresh air supply. When the CO level enters the alert range, the yellow LED lights up. Red means: CO out of range or insufficient fresh air supply. The LED indicators can also indicate one of the other measured values. The measured temperature, relative humidity, CO, NO2,  dew point and ambient light level are available via Modbus RTU.
 
How to control fresh air supply?
The output of this sensor can control an EC fan, an AC fan speed controller or a damper actuator. The output value varies proportionally in function of the measured temperature, humidity and CO concentration. When more fresh air is required, the sensor will increase the fan speed or open the damper.
 
Easy to connect!
The cage clamp terminal blocks reduce wiring and installation time. They eliminate the need for routine maintenance and guarantee a reliable contact for solid or stranded wires. This sensor can be supplied with 24 VDC or with 24 VAC. It is intended for 3-wire connection. The ground of the output (GND) is internally connected to the ground of the supply voltage (V-). Make sure not to connect this common ground to other devices that are powered by a DC voltage.
 
Easy to use!
This sensor doesn't require any configuration. Once installed, it is ready to use.  The default settings will do for most applications. If necessary, the settings can be adjusted via Modbus RTU. For example, a different output type can be selected to make it compatible with other devices: 0-10 VDC / 0-20 mA / 0-100 % PWM / Modbus RTU. Also the light intensity of the LEDs for status indication is adjustable. The Modbus register map provides a complete overview of all adjustable settings.
 
The best quality and reliability
This HVAC sensor is manufactured in Europe. Each sensor is calibrated and tested in our factory. In the unlikely event of CO - NO2 sensor element failure, this module can be replaced. We use sensor elements and components of high quality. This ensures the long-term stability and accuracy of this HVAC transmitter.

Related articles

Website is not supported on Internet Explorer! Please use Chrome, Firefox, Edge or other browser.